Product Details:
Power | 21.5 |
Model Name/Number | Four side moulder J-4230 |
Size of Dust Collecting Port Diameter | 100 mm / 4 inch |
Top and Bottom Spindle Electric Motor | 5 HP / 2800 rpm |
Electric Motor For Feeding | 3 x 0.5 / 1440 no x HP/RPM |
Total Power Required | 21.5 HP |
Working Width | 40 - 225 mm / 1 1/2 - 9 inch |
Model No | J-4230 |
Feeding Speed | 12 (feet / min) |
Top and Bottom Spindle Speed | 5000 rpm |
Top and Bottom Spindle Cutter Diameter | 125 mm / 5 inch |
LH and RH Spindle Cutter Diameter Min Max | 100 - 200 mm / 4 - 8 inch |
Top Spindle Up Down Movement | 150 mm / 6 inch |
Bottom Spindle Up Down Movement | 40 mm / 1.575 inch |
Infeed Table Adjustment | 6 mm / 1/4 inch |
Working Thickness | 6 - 150 mm / 1/4 x 6 inch |
LH and RH Spindle Speed | 6000 rpm |
Weight of Machine | 2100 Kg |
Min Length Of Work Piece | 455 mm / 18 inch |
Infeed Table Length | 1600 mm / 63 inch |
Sturdy built heavy-duty machine to suit Indian working condition for precise application of four side operation in one pass.
Use for mass production of door frames, window frames,wooden floors. etc. Separate motors for each spindle to ensure efficent power transmission. Powerfull drives for the cutter blocks delivers high torque for heavy duty cutting requiremens.
Top feed rollers for easy feeding of work piece with variation in thickness. Bed lubrication to reduce friction and improve feeding of timbers. Sealed safety enclose to reduce noise levels, improve extraction and operator safety.
Standard Accessories
Additional Information:
Product Details:
Feeding Speed | 24 (feet per minute) |
Moulding Block Diameter | 95 mm / 3 3/4 inch |
Up Down Movement of Table | 63 mm / 2 1/2 inch |
Max Moulding Block width | 75 mm / 3 inch |
Weight | 300 Kg |
Model No | J-507 |
Work Table Size | 455 x 150 mm / 18 x 6 inch |
Longitudinal Movement of Table | 25 mm / 1 inch |
Moulding Block Speed | 4000 rpm |
Single and Double Auto Mould models are available. Work table can be tilted for angular moulding and V-notch table helps for moulding on square work piece.
Standard Accessories
Model | Double Auto Mould | |
J-507 | J-505 | |
Main Side | ||
mm / inch | mm / inch | |
Work Table Size | 455 x 150 / 18" x 6" | 455 x 150 / 18" x 6" |
Up / Down movement of table | 100 / 4" | 100 / 4" |
Longitudinal movement of table | 50 / 2" | 50 / 2" |
Table Tilt - Degree | 15 | 15 |
Feeding Speed (Feet per minute) | 24 | 24 |
Moulding Block Speed (RPM) | 4000 | 4000 |
Max. Moulding Block width | 114 / 4 1/2" | 114 / 4 1/2" |
Moulding block diameter | 95 / 33/4" | 95 / 33/4" |
Power required - HP / RPM | 3 / 1440 | 3 / 1440 |
Approx. wt. of machine - kg. | 300 | 260 |